Black Rebars - Low Price with High Quality

Black rebar is a regular uncoated rebar that provide superior cost effectiveness for applications where there is no moisture. Compared with other reinforcing bars with special coating, such as epoxy or anti-rust treatments, black rebar is prone to rust and corrode, but it is the cheapest and the best for the application where epoxy and anti-rust coatings are not needed.

a bundle of deformed black rebars

Black rebars

Advantages:

  • Cheapest kind of rebar.
  • Most common rebar used in buildings.
  • Excellent in applications without moisture.

As we know, standards of black rebar products are the main devise factors for the enforced concrete and enforced mansonry concrete. Several international specifications are available in our company.

Sizes:

  • Diameter:
    #2 – #11, #14, #18 or 6, 8, 10, 12, 13, 14, 16, 18, 20, 22, 25, 28, 32, 36, 40, 50 mm more details.
  • Length:
    straight: 6 – 15 meters, U-shaped or rounded coils as standards.

Standards:

  • ASTM A615: Deformed and plain carbon-steel bars for concrete reinforcement This kind of rebar can strength and hold the concrete, and be widely used in low-stress and less-demanding applications. Stress and weight can be absorbed by the rebar, meanwhile, expansion or contraction of the reinforced concrete caused by exposure to heat or cold can be distributed.
  • ASTM A706: Low-alloy steel deformed and plain bars for concrete reinforcement The ASTM A706 black rebar products, which are molded in open hearths, electric or basic oxygen furnaces, feature their weldable characteristic. it is widely used in bent caps, joints, footings, over sized shafts and so on.
  • ASTM A1035: Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement.
    This kind of rebar is one of the strongest, multipurpose and durable rebar among all of the rebars. It features its anti-corrosion characteristic which makes it suitable to used in applications where involving humid or volatile environments.
  • Other standards we also can supply, such as:
    BS4449, GB(HRB335/HRB400/HRB500), CSA G30.18-M92(R2002), DIN, JIS, SANS, NF, etc.

Tensile Comparison among ASTM A615, A706 and A1035

ASTM A615 Grade40 Grade60 Grade75 Grade80
Minimum Tensile strength 60,000 psi (420 MPa) 90,000 psi (620 MPa) 100,000 psi (690 MPa) 105,000 psi (725 MPa)
Minimum yield strength (0.2% offset) 40,000 psi (280 MPa) 60,000 psi (420 MPa) 75,000 psi (520 MPa) 80,000 psi (550 MPa)
Elongation in 8 in. [200 mm], min, %
No.3 [10] 11 9 7 7
No.4, 5 [13, 16] 12 9 7 7
No.6 [19] 12 9 7 7
No.7, 8 [22, 25] - 8 7 7
No.9, 10, 11 [29, 32, 36] - 7 6 6
No.14, 18 [43, 57] - 7 6 6
ASTM A706 Grade60 Grade80
Minimum Tensile strength 80,000 psi (550 MPa) 100,000 psi (690 MPa)
Minimum yield strength 60,000 psi (420 MPa) 80,000 psi (550 MPa)
Maximum yield strength 78,000 psi (540 MPa) 98,000 psi (675 MPa)
Elongation in 8 in. [200 mm], min, %
No.3, 4, 5, 6 [10, 13, 16, 19] 14 12
No.7, 8, 9, 10, 11 [22, 25, 29, 32, 36] 12 12
No.14, 18 [43, 57] 10 10
ASTM A1035 Grade100 Grade120
Minimum Tensile strength 150,000 psi (1030 MPa) 150,000 psi (1030 MPa)
Yield strength (0.2 % offset) 100,000 psi (690 MPa) 120,000 psi (830 MPa)
Minimum stress resistance 80,000 psi (550 MPa) 90,000 psi (620 MPa)

If your are wondering which is the best choice of standards and sizes of black rebars for your intended applications, please contact us. We are looking forward to answering the questions you might have.

Inquiry for Our Product

Betons Reinforcing Bar Company
E-mail: sales@reinforcing-bar.com

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.